1
1
Do not discard the hardware bags or mix parts from different bags. Make note of the symbol printed on each hardware bag. The symbols can be used to identify the appropriate hardware for each step.
Do not discard the hardware bags or mix parts from different bags. Make note of the symbol printed on each hardware bag. The symbols can be used to identify the appropriate hardware for each step.
|
|
c.1 This product must be installed by qualified electricians. All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring or in doubt, consult a qualified electrician. If a bare copper or green ground connection is not available in the wall box, contact a licensed electrician for installation. Please check your local wiring regulations before installation. Safekeeping the surroundings to prevent damage during product installation. Turn off the power supply when you clean the product. Dimming performance can vary if using different dimmable LED lamps. Flickering may happen when dimming at low light intensity. Use only with 120V/AC 60Hz. Do not exceed maximum rating of dimmer as indicated on the device. The wall box depth should be≥35mm. Do NOT use with aluminum wire.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Start now for Seamless Setup
| Tools |
2 More |
| Parts |
15 More |
|
|
|
CEILING BRACKET: STEP 1This is dummy copy not actual copy. Before diving into installation, switch off the power. This is dummy copy not actual copy. Before diving. |
|
|
Step
|
|
|
|